CTI Products RadioPro Betriebsanweisung PDF herunterladen (Seite 16)

RadioPro Dispatch Installation and Configuration Guide

Step 3. Manage IP Gateways

While in Edit mode, configure the connections to IP Gateways using the following steps:

1. Click on the

File menu, then click Manage IP Gateways to display the following window:

2. Click the button to display the following

Add Gateway window:

3. In the

Gateway Address field, enter the IP Address for the RadioPro IP Gateway. The default port used by a

RadioPro IP Gateway is TCP port 48222. If needed, the port number of an IP Gateway can be changed by using

the ICU.exe utility. If the default port for an IP Gateway has not been changed, then only the IP address is needed

in the

Gateway Address field. However, if the port number for an IP Gateway has been changed to a non-default

value, then the IP address must be followed by the colon symbol “:” , and then followed by the port number, as

shown in the following example:

10.120.233.46:3355

If the IP Gateway is connected to a different IP LAN subnet than the RadioPro Dispatch client PC, then enter the

external IP address of the firewall or router that is protecting that subnet. In this case, a port-forwarding rule is

needed to be programmed into the firewall or router for each IP Gateway.

See RadioPro IP Gateway Installation Guide S2-61791 for additional details.

4. Enter the

Password for the IP Gateway.

5. Click the

Test button to determine if the RadioPro IP Gateway is accessible using the IP Network. “Connection

Successful” will be displayed if the connection succeeded.

6. Finally, click the

Add button to add this RadioPro IP Gateway to the device list as shown in the following:

Table headings in the above window are defined as follows:

Address

IP Address assigned to IP Gateway, and Port Number

Name

Name assigned to IP Gateway

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 55 56

Keine Kommentare

CTI Products RadioPro Betriebsanweisung Seite 16